Rok Power Washer Instructions New

If the engine is cold, move the choke lever over to the position. Set the throttle lever to the FAST (rabbit) position.

Once the engine starts, smoothly move the choke lever back to the "RUN" position (open). Selecting and Changing Nozzles

Most ROK power washers require attaching the upper handle to the lower frame. Align the extension poles, slide them into place, and secure them using the provided bolts and plastic hand knobs. Tighten them firmly by hand. Connect the Spray Gun and Wand

Once the system is fully primed with water, you are ready to power on the unit. Starting an Electric Model rok power washer instructions new

Improper shutdown can leave dangerous residual pressure trapped in the hose line, making it impossible to disconnect and hazardous to handle.

Screw one end of the high-pressure hose onto the water outlet threads of the pump. Screw the other end tightly onto the base of the spray gun.

Plug the power cord directly into a grounded electrical outlet. Avoid using long extension cords, as they cause voltage drops that can burn out the motor. Switch the main power dial from to ON (I) . If the engine is cold, move the choke

: Plug the unit into a grounded outlet. If the plug has a GFCI, press the Power Switch

As soon as the engine fires up and warms up for a few seconds, gradually slide the choke lever back to the position. 6. Selecting and Using the Nozzles

Here is everything you need to know to assemble, start, use, and maintain your new machine. 1. What’s in the Box? (Component Checklist) Selecting and Changing Nozzles Most ROK power washers

Most new kits include color-coded quick-connect nozzles for different tasks: Pressure Washer Safety Guide - Blog 17 Jun 2025 —

Plug the heavy-duty power cord directly into a grounded, outdoor-rated GFCI electrical outlet. Do not use extension cords, as they cause voltage drops that burn out electric motors.