Yl-105 Datasheet !!top!! [2027]

5V DC (accepts 5V input from Arduino or other microcontrollers). Output Voltage: 1.9 ~ 3.6V DC (provides a regulated 3.3V).

Capable of providing up to 800mA, which is more than sufficient for both standard and high-power (PA+LNA) versions of the radio. Wiring & Pinout

8-pin female header for NRF24L01; 6-pin male header for microcontroller connection

If you find a seller listing YL-105 as a "laser sensor" or "photoresistor module," that is your clue.

While the adapter board is the most common result for "YL-105" in electronics hobbyist circles, it can also refer to a YL-105 Infrared Motion Sensor Alarm yl-105 datasheet

| YL-105 Pin Label | Typical Arduino Connection | Function Description | | :--- | :--- | :--- | | | GND | Common ground connection. | | VCC | 5V | Power Input : Provide clean 5V power to the adapter. | | CE | Pin 9 | Chip Enable (RX/TX control). | | CSN | Pin 8 | SPI Chip Select (active low). | | SCK | Pin 13 | SPI Clock line. | | MOSI | Pin 11 | SPI Master-Out, Slave-In. | | MISO | Pin 12 | SPI Master-In, Slave-Out. |

YL-105 Output Socket (To nRF24L01+) +---------------+ GND -| 1 (•) (•) 2 |- VCC (3.3V out) CE -| 3 (•) (•) 4 |- CSN SCK -| 5 (•) (•) 6 |- MOSI MISO -| 7 (•) (•) 8 |- IRQ +---------------+ Use code with caution. Input Pin Descriptions (To Microcontroller)

Includes filtering capacitors for enhanced SPI stability.

It was her. Subject 4. Dr. Mina Sorensen, the lead hardware engineer on the YL-105 project. According to the files, she had died in the breach. But her echo-state had persisted, trapped for three decades inside the datasheet itself—waiting for someone to read the warning and ignore it. 5V DC (accepts 5V input from Arduino or

Use appropriate sealing techniques, such as O-rings or conical metal seals, depending on the pressure port type (e.g., Kavlico Pressure Sensors ).

Reliable in high-temperature environments. 4. Installation and Wiring Guidelines

Understanding the pinout is essential. The YL-105 module typically exposes four pins (or a 4-pin header):

If you bought a multi-pack and they behave differently, check the resistor values on the PCB. Clone variations exist, but the functional principle remains the same. Wiring & Pinout 8-pin female header for NRF24L01;

: Can be modified by hobbyists to trigger external relays or IoT notifications. 🔌 Pinout & Wiring (Adapter Version)

This means for every 100 Gauss increase in magnetic field, the analog output rises by 250mV.

A voice—not audio, but felt—rippled through his mind: “Hello? Is anyone there?”

The YL-105 shines in projects requiring low-power, low-cost wireless links: