Bosch Serie — 6 Service Mode 'link'

: Water Inlet Valve Test. Tests individual hot/cold/detergent drawer solenoids.

Dishwasher service mode is used to view error memory (C0–C7) and run a quick test cycle to check for leaks or drainage issues.

button. While holding it, turn the dial one click clockwise to the 7 o'clock position (often "Drum Clean"). bosch serie 6 service mode

Runs a abbreviated 5–10 minute cycle testing all components sequentially.

Immediately press and button (on some models, this is the Spin Speed button). : Water Inlet Valve Test

: Rotate the selector knob clockwise to the Spin program, which is typically at the 6 o'clock position. The Start/Pause light will begin flashing.

Release the button. The display should light up with the last error code or show "P1". Navigating: button

: While holding the RPM button, turn the dial one click clockwise to the 7 o'clock position (often the Drum Clean or SuperQuick setting).