Roll back the Prolific/FTDI driver to an older, compatible version (e.g., version 3.2.0.0 for older Prolific chips) or install certified manufacturers' drivers. Low radio battery voltage.
Wait for the transfer status bar to complete. Do not touch the cable or turn off the PC during this window.
Once the software says "Write Successful," the radio will reboot automatically. Turn off the radio, disconnect the cable, and test your new frequencies. Troubleshooting Common Software Errors "Communication Error" or "No Response from Radio" hyt tc 265 programming software
Disclaimer: Ensure you have the appropriate license to transmit on the frequencies you program into the TC-265.
Do not enable Decode CTCSS unless you want to block all other traffic. Roll back the Prolific/FTDI driver to an older,
Click on > Communication Port and select the COM port you identified in the Device Manager.
Before attempting to program your HYT TC-265 radio, you must gather the correct hardware and software tools. 1. The Right Programming Cable Do not touch the cable or turn off the PC during this window
A dedicated HYT-compatible programming cable is required. This typically features a multi-pin connector on one end (matching the radio's speaker/microphone jack) and a USB connector on the other.
: You can configure each individual channel for either 25 kHz wideband or 12.5 kHz narrowband channel spacing. This flexibility ensures compliance with local government spectrum policies, such as the FCC narrowbanding mandates. 2. Interference Mitigation and Privacy